Show simple item record

dc.contributor.advisorAzad, AKM Abdul Malek
dc.contributor.authorFerdous, Jannatul
dc.contributor.authorSani, Md. Sanzidul Islam
dc.contributor.authorShaker, Nabil
dc.contributor.authorKhan, Bonny Amin
dc.date.accessioned2012-04-09T10:52:28Z
dc.date.available2012-04-09T10:52:28Z
dc.date.copyright2011
dc.date.issued2011-12
dc.identifier.otherID 09221171
dc.identifier.otherID 09221058
dc.identifier.otherID 09221069
dc.identifier.otherID 09221065
dc.identifier.urihttp://hdl.handle.net/10361/1764
dc.descriptionThis thesis report is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2011.
dc.descriptionCataloged from PDF version of thesis report.
dc.descriptionIncludes bibliographical references (page 61).
dc.description.abstractThe word itself “Solar” describes that we are dealing with some renewable energy source for a hot water system. A Solar Hot Water System (SHWS) has been already designed; further implementation has been done by working on its insulation at variable time, temperature and solar radiation so that there is a minimum temperature drop over night decreases. A suitable material is found for insulation which is feasible, cost effective and available. For this project an instrument named “Pyranometer” has been used to measure solar radiation flux density (in watts per meter square) and the experimental data collected from pyranometer will be used to find the optimum position of SHWS.en_US
dc.description.statementofresponsibilityJannatul ferdous
dc.description.statementofresponsibilityMd. Sanzidul islam sani
dc.description.statementofresponsibilityNabil Shaker
dc.description.statementofresponsibilityBonny Amin khan
dc.format.extent61 pages
dc.language.isoenen_US
dc.publisherBRAC Universityen_US
dc.rightsBRAC University thesis are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
dc.subjectElectrical and electronic engineering
dc.titlePerformance improvement of SHWS by increasing thermal efficiency using insulation materials and optimum position of solar collectorsen_US
dc.typeThesisen_US
dc.contributor.departmentDepartment of Electrical and Electronic Engineering, BRAC University
dc.description.degreeB. Electrical and Electronic Engineering


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record