BRAC University Institutional Repository

Design and animation of automated alternative solar water heater system at the BRAC University roof top by using solid works and implement the controller using GAL technology

DSpace/Manakin Repository

Show simple item record

dc.contributor.advisor Azad, AKM Abdul Malek
dc.contributor.author Chowdhury, Ahasanul Haque
dc.date.accessioned 2012-07-04T05:18:12Z
dc.date.available 2012-07-04T05:18:12Z
dc.date.copyright 2012
dc.date.issued 2012-05
dc.identifier.other ID 06310030
dc.identifier.uri http://hdl.handle.net/10361/1914
dc.description This thesis report is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Electronics and Communication Engineering, 2012. en_US
dc.description Cataloged from PDF version of thesis report.
dc.description Includes bibliographical references (page 54).
dc.description.abstract The objective of the thesis is to design the “alternative Solar Water Heater with Automated control system”, which is developed by CARG at the roof top UB building, using “SolidWorks 2012” software. Initially, I made a 2D model of the roof top project in SolidWorks. The sketch will consist of geometry and dimensions to define the size and location of the system. The dimensions in the sketch can be controlled independently. Finally, that drawing will be created of the designed model. Views are automatically generated from the SolidWorks model (3D) and notes, dimensions and tolerance can be easily added to the drawing as needed. en_US
dc.description.statementofresponsibility Ahasanul Haque Chowdhury
dc.format.extent 54 pages
dc.publisher BRAC University en_US
dc.rights BRAC University thesis reports are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
dc.subject Electronics and communication engineering
dc.title Design and animation of automated alternative solar water heater system at the BRAC University roof top by using solid works and implement the controller using GAL technology en_US
dc.type Thesis en_US
dc.contributor.department Department of Electronics and Communication Engineering, BRAC University
dc.description.degree B. Electrical and Communication Engineering


Files in this item

Files Size Format View
Design and animation of automation.pdf 2.071Mb PDF View/Open or Preview

This item appears in the following Collection(s)

Show simple item record

Policy Guidelines

Search DSpace


Browse

My Account