Mohsin, Abu S.M.Sakib, Taiyeb HasanKhan, Fahim TawfiqFahim, OmarRahman, Md. ArafatMeem, Nazmun Nahar Khan2023-12-132023-12-1320232023-05ID 19121119ID 19121095ID 19121090ID 19121109http://hdl.handle.net/10361/21976Cataloged from PDF version of final year design project.Includes bibliographical references (pages 95-97).This final year design project is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2023.The increasing demand of renewable energy in our day-to-day life leads us to contemplate methods of incorporating renewable sources with conventional grid as several hybrid systems can be designed to meet the power demand of household loads. A typical hybrid system can be a combination of renewable sources only or it can be a combination of both renewable and conventional power system. Since, two or more sources are combinely working hence loads are shared between the loads. To facilitate the load sharing scheme, a switching mechanism is required that will control the sources and the loads as well. In our project, we have designed a system that works to ensure dynamic load sharing for a 1200 square feet apartment utilizing grid and solar energy controlled by an automated transfer switch (ATS)) based on the availability of sources, loads demand, and the battery state of charge (SOC) so that we can reduce dependency on fossil fuel, lower electricity bill and guarantee uninterrupted supply of power for our homes. The household loads will be shared by both solar and grid power depending upon the load demand and the availability of these sources.109 pagesenBrac University project reports are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.Load sharingATSHybrid sourceHybridization techniquesProject Report