dc.contributor.author | Bashar, Khandaker Lubaba | |
dc.contributor.author | Islam, Samia M.Naeemul | |
dc.contributor.author | Choudhury, Mohammad Ali A.Shoukat | |
dc.contributor.author | Abedin, Amina Hasan | |
dc.contributor.author | Uddin, Mohammad Nasir | |
dc.date.accessioned | 2018-04-10T05:03:33Z | |
dc.date.available | 2018-04-10T05:03:33Z | |
dc.date.issued | 2017-04-26 | |
dc.identifier.citation | Bashar, K. L., Islam, S., Choudhury, M. A., Abedin, A. H., & Uddin, M. N. (2017). A modular one-switch three-phase single ended primary inductor (SEPIC) rectifier. Paper presented at the Proceedings of the IEEE International Conference on Industrial Technology, 24-29. doi:10.1109/ICIT.2017.7913053 | en_US |
dc.identifier.isbn | 978-150905320-9 | |
dc.identifier.uri | http://hdl.handle.net/10361/9839 | |
dc.description | This conference paper was published in the IEEE International Conference on Industrial Technology, ICIT 2017; Hilton TorontoToronto; Canada; 23 March 2017 through 25 March 2017 [© 2017 IEEE] and the definite version is available at : http://doi.org/10.1109/ICIT.2017.7913053 The Journal's website is at: https://ieeexplore.ieee.org/document/7913053/ | en_US |
dc.description.abstract | An input switch based modular Single Ended Primary Inductor (SEPIC) three phase AC-DC converter is proposed in this paper. The proposed rectifier has the advantage of step-up/down voltage gain with boost input stage. Input boost stage allows input current shaping accompanied by power factor correction. The topology will also provide possible capacitive isolation of input/output sides of the converter. The rectifier has minimum number of controlled switch, less number of diodes, fewer controller components and driver, isolators, sensors and heat sinks than other input switched three phase rectifiers. As a result, the proposed rectifier will be easy to operate, maintain, reliable in operation, light weight, compact and cost effective. The proposed three phase SEPIC rectifier is presented in this paper with its typical simulation and prototype's experimental results. | en_US |
dc.language.iso | en | en_US |
dc.publisher | © 2017 IEEE | en_US |
dc.relation.uri | https://ieeexplore.ieee.org/document/7913053/ | |
dc.subject | Input current shaping | en_US |
dc.subject | Modular three phase rectifier | en_US |
dc.subject | Power factor correction (pfc) | en_US |
dc.subject | Three phase SEPIC rectifiers | en_US |
dc.subject | Vienna rectifiers | en_US |
dc.title | A modular one-switch three-phase Single Ended Primary Inductor (SEPIC) rectifier | en_US |
dc.type | Conference paper | en_US |
dc.description.version | Published | |
dc.contributor.department | Department of Electrical and Electronic Engineering, BRAC University | |
dc.identifier.doi | http://doi.org/10.1109/ICIT.2017.7913053 | |