System design of two wheeler self-balanced vehicle
Date
2014-01Publisher
© 2014 Institute of Electrical and Electronics Engineers Inc.Metadata
Show full item recordCitation
Rumi, S. M. I., Hossain, M. F., Islam, I. S. M. S., & Rahman, M. K. (2015). System design of two wheeler self-balanced vehicle. Paper presented at the 10th France-Japan Congress, 8th Europe-Asia Congress on Mecatronics, MECATRONICS 2014, 331-336. doi:10.1109/MECATRONICS.2014.7018582Abstract
Any two wheeler vehicles usually cannot balance by itself when it is in rest or running at a lower speed. The purpose of this research is to make a vehicle that would be stable by itself in such situations and can be stabilized against any physical impact. Two heavy rotating disks with hub motors have been used here to develop the mechanism of compensating the tilt of the vehicle and get it stabilized. To measure the tilt angle, an android device has been used and then the angle of tilt has sent to a Bluetooth receiver which is connected with the vehicle. An android application has been developed which takes the tilt angle as input from its gyroscope and sends data to that receiver accordingly. This arduino controls the motor which has been used to control the tilt direction of both of the rotating disks according to the signal. This vehicle is designed to provide the safety that two wheeler vehicle does not have during an impact or at zero velocity. Hence, this research is aimed to design a safe, cost effective and fuel efficient self-balanced vehicle for third world countries like Bangladesh.
Description
This conference paper was presented in the 10th France-Japan/8th Europe-Asia Congress on Mecatronics, MECATRONICS 2014; Tokyo Metropolitan UniversityTokyo; Japan; 27 November 2014 through 29 November 2014 [© 2014 IEEE] The conference paper's definite version is available at: http://dx.doi.org/10.1109/MECATRONICS.2014.7018582Publisher Link
http://ieeexplore.ieee.org/document/7018582/Department
Department of Computer Science and Engineering, BRAC UniversityType
Conference paperCollections
- Conference Paper [18]
- Faculty Publications [75]