Show simple item record

dc.contributor.authorFerdous, Jannatul M Shafi
dc.contributor.authorIslam, Md Sanzidul
dc.contributor.authorShaker, Nabil
dc.contributor.authorKhan, Bonnyamin
dc.contributor.authorAzad, AKM Abdul Malek
dc.date.accessioned2016-12-11T10:00:28Z
dc.date.available2016-12-11T10:00:28Z
dc.date.issued2012
dc.identifier.citationFerdous, J., Islam, M. S., Shaker, N., Khan, B. A., & Azad, A. (2012). Performance improvement of SHWS by increasing thermal efficiency using insulation materials and optimum position of solar collectors. Paper presented at the Proceedings of 2nd International Conference on the Developments in Renewable Energy Technology, ICDRET 2012, 192-197. Retrieved from www.scopus.comen_US
dc.identifier.isbn978-146730463-4
dc.identifier.urihttp://hdl.handle.net/10361/7184
dc.descriptionThis conference paper was presented in the 2nd International Conference on the Developments in Renewable Energy Technology, ICDRET 2012; Dhaka; Bangladesh; 5 January 2012 through 7 January 2012 [© 2012 Developments in Renewable Energy Technology (ICDRET) ]en_US
dc.description.abstractThe word itself "Solar" describes that we are dealing with some renewable energy source for a hot water system. A Solar Hot Water System(SHWS) has been already designed, further implementation has been done by working on its insulation at variable time, temperature and solar radiation so that there is a minimum temperature drop over night decreases. A suitable material is found for insulation which is feasible, cost effective and available. For this project an instrument named "Pyranometer" has been used to measure solar radiation flux density (in watts per meter square) and the experimental data collected from pyranometer will be used to find the optimum position of SHWS.en_US
dc.language.isoenen_US
dc.publisher© 2012 Institute of Electrical and Electronics Engineers Inc.en_US
dc.relation.urihttp://ieeexplore.ieee.org/document/6153460/
dc.subjectDIFen_US
dc.subjectGHIen_US
dc.subjectPyranometeren_US
dc.subjectR valuesen_US
dc.subjectSHWSen_US
dc.titlePerformance improvement of SHWS by increasing thermal efficiency using insulation materials and optimum position of solar collectorsen_US
dc.typeConference paperen_US
dc.description.versionPublished
dc.contributor.departmentDepartment of Electrical and Electronic Engineering, BRAC University


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record