dc.contributor.advisor | Rhaman, Md. Khalilur | |
dc.contributor.author | Musharraf, Yaseer | |
dc.contributor.author | Hassan, Maruf | |
dc.contributor.author | Sakib, Shadman | |
dc.date.accessioned | 2014-03-16T07:11:37Z | |
dc.date.available | 2014-03-16T07:11:37Z | |
dc.date.copyright | 2014 | |
dc.date.issued | 2014 | |
dc.identifier.other | ID 09221113 | |
dc.identifier.other | ID 09221021 | |
dc.identifier.other | ID 10121083 | |
dc.identifier.uri | http://hdl.handle.net/10361/3041 | |
dc.description | This thesis report is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2014. | |
dc.description | Cataloged from PDF version of thesis report. | |
dc.description | Includes bibliographical references (page 43). | |
dc.description.abstract | Every machine has a safe range of operation which includes heat emission, produced sound and vibration which an expert technician can troubleshoot most of the problems just by observing the behavior (sound, vibration, smoke, heat emission etc.) of a machine. But the machine operation complex has a hazardous environment which eventually may cause permanent health damage and it is also expensive as well. Depending upon the machine's purpose, burns, electric shocks and limb amputations are also possible. Where a machine has not been maintained properly, it may malfunction and cause injury to either the operator or other personnel on the ground or in the vicinity. To reduce these problems we are developing a special type of “monitoring system” which will allow us supervise the condition of machine in real time from a safe distance thoroughly with a full control over it. | en_US |
dc.description.statementofresponsibility | Maruf Hassan | |
dc.description.statementofresponsibility | Shadman Sakib | |
dc.description.statementofresponsibility | Yaseer Musharraf | |
dc.format.extent | 51 pages | |
dc.language.iso | en | en_US |
dc.publisher | BRAC University | en_US |
dc.rights | BRAC University thesis are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. | |
dc.subject | Electrical and electronic engineering | |
dc.title | A Distanced Machinery Controlling and Monitoring Guardian | en_US |
dc.type | Thesis | en_US |
dc.contributor.department | Department of Electrical and Electronic Engineering, BRAC University | |
dc.description.degree | B. Electrical and Electronic Engineering | |